$13.06 – $46.72
3/4 #9 raised expanded metal is a sheet of metal with a diamond pattern of openings, a thickness of 9 gauge, and a short width of 3/4 in:
| 3/4 #9 raised expanded metal | |
| Thickness | 9 gauge |
| Short width | 3/4 in |
| Flat or raised | Raised |
| Sheet size | 48 in x 96 in |
Expanded metal is made by stretching and slitting metal sheets to create the diamond pattern. It can be made from a variety of materials, including aluminum, carbon steel, galvanized steel, and stainless steel.
Expanded metal is used for a variety of applications, including:
decorative fencing, filters, enclosures, machinery guards, security, sifting, smokers, and flooring.
Expanded metal numbers indicate the metal’s gauge and dimension. The first number is the nominal dimension, and the second number is usually the gauge or weight per 100 square feet.
* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.
1240 Majesty Dr., Dallas, TX-75247
P.O. Box 560626, Dallas, TX-75247
CALIFORNIA PROPOSITION 65
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances.