$180.48 – $521.44
A Stainless Steel 304 Perforated Sheet with 1/4″ holes on 3/8″ staggered centers and 11-gauge thickness is a type of metal sheet that has been punched with a pattern of holes. The holes are 1/4 inches in diameter and are spaced 3/8 inches apart in a staggered pattern, which means the holes are offset from each other rather than aligned in straight rows. This can be used for various applications like filtration systems, ventilation, architectural design, machine guards, and decorative purposes.
* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.
1240 Majesty Dr., Dallas, TX-75247
P.O. Box 560626, Dallas, TX-75247
CALIFORNIA PROPOSITION 65
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances.