Steel Expanded Metal U-Edging-18GA 5/16 x 1

Steel Expanded Metal U-Edging-18GA 5/16 x 1

$11.00 – $22.00

Part#: SUEDGING5161 Categories , , ,
DESCRIPTION

Steel U edging is a U-shaped strip of metal that’s attached to the edges of expanded metal, perforated metal, or wire mesh sheets to make them safer and more attractive. It can be attached by welding or press-fitting.

Steel U edging is used in a variety of projects, including designer infill panels, railing systems, and gate panels.

Here are some things to consider about steel U edging:

  • Materials: Steel U edging is available in a variety of materials, including carbon steel, stainless steel, aluminum, and galvanized steel.
  • Base sizes: Steel U edging comes in different base sizes, such as 1/16″, 1/8″, and 1/4″. The base size you need depends on the type of sheet you’re attaching it to.
  • Length: Steel U edging can be cut to the length needed for your project. Stock lengths are often available in 4 ft, 8 ft, and 12 ft.
  • Installation: Steel U edging is easy to install.
  • Maintenance: Metal edging is long-lasting and maintenance-free.

* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.

metals 4 u logo
Physical Address:

1240 Majesty Dr., Dallas, TX-75247

Mailing Address:

P.O. Box 560626, Dallas, TX-75247

Direct Any Correspondence To:

METALS 4U

1240 Majesty Dr., Dallas, TX-75247

+1 (214) 231-1434

Buy Securely — UPS Ships Direct to You!
credit card
WARNING
warning icon

CALIFORNIA PROPOSITION 65

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances.

Facebook-f Instagram