$9.23
A galvanized 4-hole closed 60-degree angle is a metal angle used in construction and structural applications. The term galvanized refers to the process of applying a protective zinc coating to the metal to prevent rust and corrosion. The 4-hole closed designation indicates that the angle has four holes for fasteners or bolts and is closed at both ends. The 60-degree angle describes the angle of the bend in the metal, which is used to join structural components at a specific angle. These angles are used for framing, bracing, and support applications in building construction and other industrial settings.
Hole Diameter-9/16″
Hole Spacing End Distance 13/16″
Hole Spacing Center to Center- 1-7/8″
Thickness- 1/4″
Width 1-5/8″
Angle 4-3/8 x 5
* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.
1240 Majesty Dr., Dallas, TX-75247
P.O. Box 560626, Dallas, TX-75247
CALIFORNIA PROPOSITION 65
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances.