$40.00 – $111.00
“Stainless Steel Expanded Metal Flattened 1/2 #16 T304” refers to a type of stainless steel sheet that has been slit and stretched to create a diamond-shaped pattern of openings, with a thickness of 1/2 inch, a “mesh” size of #16, and is made from 304 grade stainless steel that has been flattened to create a smooth surface; essentially, it’s a flat, expanded metal sheet with a specific size and material grade, commonly used for applications like machine guarding, security enclosures, and decorative elements due to its corrosion resistance and aesthetic appeal.
Key points about this term:
This indicates the material is stainless steel that has been processed to create an open, diamond-shaped mesh pattern.
This means the expanded metal has been further processed to create a smooth, even surface on both sides.
This refers to the thickness of the sheet in inches.
This is the mesh size, indicating the size of the diamond openings in the expanded metal.
This represents the specific grade of stainless steel, which is a widely used corrosion-resistant alloy.
* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.
1240 Majesty Dr., Dallas, TX-75247
P.O. Box 560626, Dallas, TX-75247
CALIFORNIA PROPOSITION 65
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances.